What’s In A Label?
The Energy Star label helps sell windows, but the criteria used to determine those ratings on that label have changed
Remember when all a window had to do was fill a hole in the wall and look reasonably presentable? Actually, to get technical about it, the window is the hole and not what you put in it, or at least that was the understanding for most of its history [4].
Human dwellings, at least in temperate climates, initially had few if any holes in the walls, except the one you used to come in and out. But light was needed and someone somewhere along the way began building walls with holes in them.Someone else figured out how to fill those holes with animal skins, scraped and stretched to a semi-translucent state, or in some cultures, paper. The use of glass goes back to Mesopotamia in 3,500 BC, but the Romans were the first to put it in windows, with frames of wood, iron, or lead.The building product we refer to as a “window”—what goes in the hole, rather than the hole itself—first came into widespread use in England in the early 17th century.
The Hole Thing
But a window is still a hole, and a “thermal hole” at that. It’s one of those places in the building where energy leaves or leaks. And it’s a biggie. Some research from a dozen years back suggested that even the most efficient windows are nowhere near as effective as a well-constructed wall in retaining energy. “Most windows are ten times less energy efficient than the wall area they replace,” wrote Paul Fisette, in Windows: Understanding Energy Efficient Performance [5] in 2003.
What’s changed? What Fisette says about how windows work or don’t work when it comes to energy in the home remains true, but the difference is that today’s windows are better, meaning more efficient.
That efficiency is measured by the National Fenestration Ratings Council [6], a non-profit organization. The NFRC is, in its own words, “the only uniform, independent rating and labeling system for the energy performance of windows, doors, skylights and attachment products.”
The organization uses two criteria when determining window performance: U-Factor and Solar Heat Gain Coefficient. (See "How To Read the NFRC Label [7]," which explains criteria on a label and shows consumers how to interpret what’s there.)
The Environmental Protection Agency uses NRCA ratings to award certain window products its Energy Star and its even more sought-after “Most Efficient” categories. A dozen years ago, when Fisette’s article appeared, Energy Star qualification criteria [8]ranged from a U-Factor of 0.30 in Northern Climate Zones (roughly half of the U.S.) to 0.60 in the Southern Zone.
Fast forward to today, when changes in the window assembly, insulation, and glass have caused the EPA to up the ante onEnergy Star qualifications, as noted by Ohio manufacturer Sunrise Windows on its blog [9]. Also, view a webinar on Energy Star 6.0 [10], courtesy of Quanex Building Products.
Energy Obsessed
Does it make that big a difference? Micro and macro, the answer is yes. The potential effect is huge. Commercial and residential buildings account for about 40% of U.S. energy consumption. Those buildings make up the largest piece of the total U.S. energy consumption [11] pie chart, consuming more energy even than manufacturing. So if millions of windows were replaced with window units more efficient by a third, or better … well, to get an idea, you can view an EPA chart [12] that shows how much would be saved, on average, by replacing a single-pane glass window or even double pane clear glass replacement windows with today’s more efficient window units.
Now imagine today’s double pane windows, which with gas insulation, coatings, etc. are that much more efficient.
Homeowners are not indifferent to this argument. They want a more comfortable house and a lower energy bill. The Energy Star "Partner Resource Guide [8]" cites 2012 survey data showing that when homeowners bought a particular window brand because of label or product claim, the largest number—45%— did so because it was Energy Star Certified. That probably doesn’t mean they could explain the specifics behind that label right off the bat, or what something called “fenestration” is. What it does mean, though, is that they care a lot about how well that window will retain energy.
Links:
[1] http://www.proremodeler.com/energy-efficiency
[2] http://www.proremodeler.com/green-products
[3] http://www.proremodeler.com/windows
[4] https://en.wikipedia.org/wiki/Window
[5] http://bct.eco.umass.edu/publications/by-title/windows-understanding-energy-efficient-performance/
[6] http://www.nfrc.org/about.aspx
[7] http://www.nfrc.org/WindowRatings/The-NFRC-Label.html
[8] https://www.energystar.gov/ia/partners/manuf_res/downloads/PartnerResourceGuide-LowRes.pdf
[9] http://www.sunrisewindows.com/blog/2014/11/12/2015-brings-stringent-requirements-energy-star-windows-doors/
[10] http://marketing.quanex.com/acton/form/5022/001e:d-pp-002d-u-0026/1/-/-/-/-/index.html
[11] http://needtoknow.nas.edu/energy/energy-use/
[12] https://www.energystar.gov/index.cfm?c=windows_doors.pr_savemoney
This comment has been removed by a blog administrator.
ReplyDeleteHello,
ReplyDeleteThanks a lot for such useful article. Whatever the information you have described regarding energy efficient windows are good.. Nice post dear.......
energy efficient windows